Joe,
I am currently using a PC-8/e with CT.
You can map the I/O and IRQs for each serial port.
73, Bill
N6WS
n6ws@msn.com
- -----Original Message-----
From: owner-cq-contest@contesting.com
[mailto:owner-cq-contest@contesting.com]On Behalf Of Joe Shuey NE3H
Sent: Thursday, March 04, 1999 4:27 PM
To: cq-contest@contesting.com
Subject: [CQ-Contest] Digi International Multi Port Serial Boards
CT works with Digi Boards PC/4; PC/8 etc.
Digi no longer offers the PC/4. The do offer the PC/8.
However, the Classic Boards are about $100 cheaper. It appears that the
PC/8 is jumpered to select port addresses. The Classic Board appears to
be later version. It is configured ( as shipped ) as a 'PnP' windows
board. However Digi supplies the software to configure it as a Legacy
card ( to be used with DOS or other operating systems ). Does anyone
know if it will work with CT?
Thanks de joe
--
CQ-Contest on WWW: http://www.contesting.com/_cq-contest/
Administrative requests: cq-contest-REQUEST@contesting.com
|