Yep - it was actually
5 (real Sig strengh) dah-dah-dah-dah-dit dah-dah-dah dah-dah-dah
dah-dah-dah
and Nose still won many times!!
73, Gator N5RZ
W6PH wrote:
>
> I hate to make comments about other postings, but old memories are
> jogged by this "zero power" thing. Many OF's on here probably remember
> KH6IJ's report as 579000 in the ARRL Contests. Kilowatts on the outside
> were very rare and his fist was impeccable. And the report was a true
> RST, not the current 5NN. I can still hear his report. What a great
> contester he was. Very 73, Kurt, W6PH
>
> --
> CQ-Contest on WWW: http://www.contesting.com/_cq-contest/
> Administrative requests: cq-contest-REQUEST@contesting.com
--
CQ-Contest on WWW: http://www.contesting.com/_cq-contest/
Administrative requests: cq-contest-REQUEST@contesting.com
>From Mark van Wijk" <mark3fcd@xs4all.nl Thu Feb 26 07:06:08 1998
From: Mark van Wijk" <mark3fcd@xs4all.nl (Mark van Wijk)
Subject: [CQ-Contest] preparation ?? Welcome Mr. Murphy.....
Message-ID: <01bd4285$030e6300$d0226dc2@mark3fcd>
>
>The hardware is stainless steel and will have a tendency to gall when
>turned under stress. I had a similar problem with my hardware and saved
>the day by applying lots of silicone spray lubricant to the threads
>before removing the nuts.
Good idea, I''l remember that for next time. But I did'nt expect this with
new stuff.
>The R7000+80 is considerably taller, so this may be more difficult.
Yes, and boy does it bend with all that weight from the enormous extra
traps. Luckily I got a home-made very heavy duty solid steel baseplate. It
was capable of keeping up the R7000+ by itself without guying!
>
>I took mine down 4 times doing adjustments. They really don't change very
>much. I don't think you'll see 1:1 SWR with this beast on every band. But
>it should be under 2:1 on each band. One reason I did not get the 80m kit
>is that it reduces the SWR bandwidth on 40m, and the 80m SWR bandwidth is
>very narrow.
True, but I needed something for 80 since the only alternative is an
inverted vee at40 ft.
There will be one with tuned (coax) feeders soon since I need something for
covering Europe on 40/80 and have a wire for 160.
>Frankly, if I had a rig with an automatic antenna tuner, I wouldn't worry
>about the SWR that much.
Ok, my FT1000MP does that job quickly and easy. But I have lots of
experiences with home made dipoles/inv-vees which worked ok except outside
of the low swr portion where the efficiency rapidly ceased more or less.
This became really worse when trying commercial trapped multiband 80/40
dipoles. A couple of say 150-200Khz higher, at an SWR of almost 3, the
antenna lost 2-3 S-units. That's why I consider this as well with the
trapped vertical.
Secondly, at high SWR the cable starts to radiate too, introducing lots of
TVI/BCI. That last one is my major problem and cannot be solved with all
the involved neigbours. People here still conclude: you are the disturber so
stop transmitting or else.... and no we won't let you in for providing any
cure. Now I have permission for that small 15 ft tower on my roof (4 el
/28MHz) but will never get clearance for anything above that height ( R7000+
is 50 ft totally).
>
>So, how do you like your R7000+80?
>
Well that's the most important question here; does it work???
Yes it does very well!!
I have broken several pile-ups working 9K2/HS0/J3/D2/TR8/Antarctic etc..
with 15 W output only!
So i'm pleased at "if you can hear them, work 'em!" It does require some
effort though, but I would'nt want to be one of those with all those
multi-big-towers do I.........?? YES I defenitely would, and please one
KW, or make that two, as well please.
The R7000+ is very quiet on the bands. I am still surprised and rechecking
the switches 'cause 40 is dead quiet between the dx. The tuned pre-amp of
the rig does a lot here but still it is amazing. When I come home after work
it's all ZL/JA/USA/VK/LU etc. I hear. Perhaps this has something to do with
a higher Q on this "half-wave" trapped vertical. 80 mtrs is much more
noisy, and I think the R7000+ performs like a quarter wave here, it has 3
seperate long radials for this band additionally.
Finally I heared several Ja on 1910 Khz the other night. The first time not
on a beverage.
>
Regards Bill.
'73 Mark, PA3FCD.
--
CQ-Contest on WWW: http://www.contesting.com/_cq-contest/
Administrative requests: cq-contest-REQUEST@contesting.com
|