In a message dated 96-04-24 11:48:10 EDT, you write:
> I think you said there
>exists a "topband" reflector. I only know of the contest, dx, and yaesu
>reflectors. Are there any other reflectors you find of interest, and if
>so could you give me their subscription addresses? Perhaps I would find
>them useful as well.
Hi, Dave --
I had to do my due diligence to find them - hi! Credit goes to Jim,
K1ZX, for the list.
TenTec tentec-request@akorn.net
CT ct-user-request@ve7tcp.ampr.org
NA na-user-request@ve7tcp.ampr.org
TR n6trlog-request@cmicro.com
160 meter topband-request@frontier.net
DX dx-request@ve7tcp.ampr.org
Anyone else have any reflectors of interest?
73, Steve K7LXC
>From Spike Lazar <slazar19@sgi.net> Thu Apr 25 23:55:28 1996
From: Spike Lazar <slazar19@sgi.net> (Spike Lazar)
Subject: Garbage on the reflector
Message-ID: <199604252255.SAA02256@orion.bv.sgi.net>
>W5HUQ At 05:09 PM 4/25/96 -0400, you wrote:
>
>I have watched with amazement the amount of garbage messages that
>are put on this reflector. This trash going on now doesnt even bring
>a snicker. So come on all you reflector Cops now is your chance.
>John W5HUQ
Give this guy a Jeffrey Dahmer cookbook!
Sincerly yours,
dr. Bafoofnik
p.s., for a clean sweep, bury a VY1JA card, It really does works!
>From Michael Tope <mtope@iu.net> Fri Apr 26 01:42:39 1996
From: Michael Tope <mtope@iu.net> (Michael Tope)
Subject: Ground Rods Made Easy
Message-ID: <199604260042.UAA09175@bb.iu.net>
Just in case all you folks out there in the enlightened masses haven't
figured this out yet, I'll share this bit of ground rod wisdom with you.
This technique was suggested to me by a colleague of mine - Haskell Walker
KJ4ZZ - and is very effective on the sandy soils found here in Florida.
To use it, get yourself a 1/2" dia compression fitting to garden hose
fitting adapter. Use this piece to connect your garden hose to one end of a
1/2" piece of copper tubing of the desired length (8' in my case). Then just
turn on the water and watch with amazement as the ground rod literally falls
into the ground like a hot knife in soft butter. Actually, in my case I hit
hard pan (allegedly compressed sand) at about 4'. The first time this
happened, my dysfunctional self-defeating alter-ego took over, and assumed
the worst - solid rock. I abandoned the water drill and resorted to a
cro-magnon strategy - hit it hard with a big hammer. This got the desired
results, but wasted the better part of an otherwise good lunch hour. During
my second and third attempts at using this technique, I managed to keep ole
cro-magnon under control. I kept the water running and patiently worked the
rod up and down until I broke through the hard pan. This took the better
part of two or three minutes with the last three feet being smooth sailing.
In short, this seems to be a real quick and easy way to put in those nasty
ground rods, and sure beats the ole hit-it-with-a-hammer method by a
longshot. Although it works real good here in Florida, I am not sure how
this technique will work on other soil types. Haskell, a South Carolina
native, tells me that this method isn't real effective on the red clay back
home. As for other parts of the country, you'll have to try it and see for
yourself.
73 de Mike, AD4VH
____________________________________________________________________________
____________
Michael Tope, AD4VH (ex KD8NS)
200 Easy Street
Melbourne, FL 32934
Phone: (407) 259-7494
Eail: mtope@iu.net
____________________________________________________________________________
____________
"It is the empty space inside the vessel that makes it useful" - Lao Tzu
|