I am using the MFJ-432 with a Omni-6 Xcvr -- This is what I get:
With Omni-6, VOX ON: Voice Keyer memory and Proset keys rig with the 432
Xmit switch in either ON or OFF positions.
With Omni-6, VOX OFF: Voice keyer memory keys rig only when the 432 Xmit
switch is in the ON (in) position. I use the Heil foot switch to key the PTT
line ---
What I see could be a little misleading as the PTT line is connected from my
MFJ- 432 to the Omni-6 - The Omni-6 will key with the PTT line even when the
rig is in the VOX position.. I would have to disconnect the PTT line from the
432/Omni-6 to replicate your setup -- Recommend hooking up the PTT line and
see if your vox works ----
Bill - AB5YG (K2MHJ)
|