For those who wish to participate in the PA party this weekend and don't
have a logger for the contest, I've put a public domain DOS based logger
on my email file server. To recieve a copy, send:
"sendme pa1200b" to "pa-fs@nad.com" (without the quotes, of course).
You will recieve a UUENCODEd ZIP file. DOS UUDECODE.BAS is also available from
my server. To recieve a copy in plain ASCII text, send "sendme fs-tools".
73 and see you in the party!
Joe - AA3GN
Portable, Potter Co.
>From broz@csn.net (John Brosnahan) Tue Oct 10 19:25:12 1995
From: broz@csn.net (John Brosnahan) (John Brosnahan)
Subject: TIC ring-rotors (ROTATORS!) parts
Message-ID: <199510101825.MAA09806@lynx.csn.net>
>Keith Morehouse-WB9TIY
>I just ordered two exact replacements from Digi-Key Corp in Thief River
>Falls, MN (Hmmmmm - same location as TIC).
Keith, et al
Todd's wife (Todd is the main contact point for the TIC rotators) works at
Digi-Key. All electronic parts in the units come from Digi-Key. Even the
meter is special ordered through Digi-Key rather than direct from the
manufacturer. I once went through the exercise of making a complete parts
list including the Digi-Key part numbers for the control units with the
thought of building a few to run my prop pitch rotators (you know, the ones
with rotors in the motors). If there is sufficient interest (ie more than
one) I might be tempted to find the list and convert it to a file that can
be emailed. Right now it is just scribbled on blank paper and stuck in the
back of a manual.
I have been so pleased with Digi-Key over the last few years that I tend to
design around what is in their catalog and only go to other catalog vendors
(Newark and Allied, etc as a last resort). So their choice of a vendor in
the same city is a fortuitous one for all concerned.
73 John
John Brosnahan W0UN
La Salle Research Corp 24115 WCR 40 La Salle, CO 80645 USA
voice 970-284-6602 fax 970-284-0979 email broz@csn.net
>From kiddi@marel.is (Kristinn Andersen) Tue Oct 10 19:41:59 1995
From: kiddi@marel.is (Kristinn Andersen) (Kristinn Andersen)
Subject: Typical yagi wind load?
Message-ID: <9510101845.AA24081@marel.is>
Hi,
I´m preparing a letter to Rohn and US Tower to request tower catalogs. I am
giving them an idea of my situation (location, wind data, etc.), in the
faint hope they may suggest something useful. Can someone out there drop me
info on typical wind load for 3, 4 or 5-el 20m CONTEST yagis in the next few
minutes? That way I can wrap this up before I leave work(!)
73 - Kristinn, TF3KX / AB4ST
>From kiddi@marel.is (Kristinn Andersen) Tue Oct 10 20:00:17 1995
From: kiddi@marel.is (Kristinn Andersen) (Kristinn Andersen)
Subject: Suggested tower mfgrs?
Message-ID: <9510101903.AA24231@marel.is>
Do you experienced aluminum growers have any general opinions on the quality
of towers made by various manufacturers? In my situation wind (up to 90mph
according to the local WX bureau) and proximity to the ocean (salt
water/air) are the main concerns.
Please respond directly and I´ll summarize to the contest reflector if it
seems worthwhile.
73 - Kristinn, TF3KX (kiddi@marel.is)
>From Jim Hollenback" <jholly@hposl62.cup.hp.com Tue Oct 10 21:07:39 1995
From: Jim Hollenback" <jholly@hposl62.cup.hp.com (Jim Hollenback)
Subject: Arco Trimmer Caps
References: <199510101753.NAA10944@dialup.oar.net>
Message-ID: <9510101307.ZM24785@hpwsmjh1.cup.hp.com>
On Oct 10, 10:44am, <HSL@hgipdx.usa.com> wrote:
> Subject: Arco Trimmer Caps
> Ok I know this is not a direct contest question but I need a
> source of Arco mica compression trimmer capacitors model no's
> 427 (300pf) and 429 (400pf). I'm hurriedly building some 80/160
> preamplifiers for my EWE antennas per an old QST article.
> I need 4 ea. and am having trouble finding them. Please respond
> direct so as to limit the bandwidth. Thanks in advance
> 73,
>
Radiokit Never answers phone, no catalog
P.O. Box 973
Pelham, NH 03076
(603)-635-2235
Circuit Specialists Inc Answers phone, little pricey.
P.O. Box 3047
Scottsdale AZ 85271-3047
(800)-528-1417
You might also try
DC Electronics
P. O. Box 3203
Scottsdale AZ 85271-3203
(800)-423-0070
(602)-945-7736
Far as I know, Mouser and Digi-Key do not carry these parts.
73, Jim, WA6SDM
jholly@cup.hp.com
|