Hi Barry:
I think maybe it is time for me to quit playing with RUFZ. There is too much
antenna work to be done around here to keep playing with this thing. Besides,
I need to put my computer back into it's case and after that won't be able to
use the headphones.
Some observations:
My best scores have come with a PARIS starting speed of 300.
With a database of 13001 calls, after 200 plus attempts, I am starting to
know some of the calls if I hear part of a callsign.
I am missing most of the calls by one letter, usually i,s,h,g,z,a,u etc. I
sit and try to decide, was that an e or an i? At that point it becomes a
guess. 50/50 chance.
With enough attempts, it would be possible to guess right enough times on a
particular run and raise my score a bit more, but what would that accomplish?
At high speeds, the program seems to drop the dit from the number 1.
Best speed so far was 480 from a starting speed of 300 with a score of 39K
something.
Now I can consistently score in the 39K to 42K range on most of the runs. I
have to be hearing particularly well to get above that, but have had several
44 and 45K runs at 416 to 446 PARIS. This is my first high speed CW reception
in many years...can't hear as well as when younger. Too many years around
high noise 400 HP diesel mining equipment.
Have found that my best runs always occur within 3 or 4 attempts when first
sitting down on a particular day. After that the score drops 2 to 3 K.
By the way, the program seems to like some calls more than others.
KH0/JE1CKA, W3LPL, 5W1GP, etc. Guess Frank gets through the pileups even on a
CONTEST without antennas.
Hope you break 50K.
73, Chas N8RR (RUFZ retired)
>From jreid@aloha.net (Jim Reid) Sat Aug 26 23:57:15 1995
From: jreid@aloha.net (Jim Reid) (Jim Reid)
Subject: Win95, mutitsk DOS&Windoze prgms.
Message-ID: <199508262254.MAA28964@hookomo.aloha.net>
Hi All,
Re the threads on multitasking. Have gotten Win95 up and running.
Multitasks WJ2O Master Logger, Mini-prop, my windows running
radio -in-the computer Softwave rcvr just fine! Actually RF and IF stuff
of the Softwave is in a box outside the computer, but the digital stuff
is on a full-size plug in card.
Tho had been running both the WJ2O logger and Mini-prop from
icons under Win. 3.11, Win95 eliminated them! So bring them up
using the MS-DOS prompt, minimize to the lower task bar after
each is running, then can bring up the windows programs, and
multitask away among them. Incidently, have yet to figure out
how to start a program, like WJ2O.exe from the Win95 Explorer
(the new equivalent of File Manager, all the .xxx file designators
seem to have vanished, so don't know which file to double
click!
Tried to also simultaneosly control the TS-950 with the Kentrol
windows controller of Kenwood rigs, but couldn't get to the
com port; guess Dave's logger has it locked-up so his
program can keep track of where the rig is tuned.
Also found I could sync the computer clock to within a second
or less of WWV using the Comsoft in-the-computer radio.
Am sure there will be many more fascinating experiences to report
as the "old" programs are tried under Win95.
73 and Aloha,
Jim Reid, AH6NB (Happily retired on the Island of Kauai)
Hawaii, USA Email: jreid@aloha.net
>From James White <0006492564@mcimail.com> Sun Aug 27 03:32:00 1995
From: James White <0006492564@mcimail.com> (James White)
Subject: Remote antenna selection
Message-ID: <33950827023233/0006492564PK4EM@MCIMAIL.COM>
lemme re-phrase my request....more generically
Does anyone have experience using their computer to switch a remote antenna
selction device that uses 110vac?
I am using the old W0MLY (Antenna Mart) 8 position antenna switch which has
a large 8 position ceramic rotary antenna switch mechanically driven by a
110 volt step motor.
If you have a device that is driven by your LPT port that turns its output
into 110V on a given "terminal", lemme know.
I can use NPN transistors to drive low voltage relay coils, but I would have
to buy eight relays...and 8 NPNs....8 resistors....etc, etc. and buy the
CMOS decoder IC...other than the relays, this isn't a lot of bucks...but it
would be a major project for this QCAO. I may be able to find inexpensive
relays at an upcoming hamfest, but...
I know that Top Ten devices is willing to fabricate something for me, but
before I go "commercial" lemme see what others have done.
Please reply to:
k1zx@mcimail.com
thanks, Jim zx
>From De Syam <syam@Glue.umd.edu> Sun Aug 27 03:44:08 1995
From: De Syam <syam@Glue.umd.edu> (De Syam)
Subject: Radio Vatican QRM
Message-ID: <Pine.SUN.3.91.950826223140.5263B-100000@espresso.eng.umd.edu>
Since there has been a fair amount of interest in the broadband noise on
40 meters which appears to emanate from Radio Vatican on 7305 KHz. (and
on 20 meters from Radio Vatican on 13765 KHz.), I am reporting the
following for what it is worth:
My friend LU3HAK, who is a house guest of mine now, spent some time at
Radio Vatican this summer where he discussed, among other things, the QRM
mentioned above. (They didn't know anything about it, but within the
past year have installed a new set of 500 KW. Telefunken transmitters to
replace some older transmitters which have now been retired.)
The only amateur radio operator on the Radio Vatican staff at the
transmitter site at Santa Maria de Galeria, where the 7305 KHz.
transmitter is located, is:
Marco Girolami, I0JBK
He is not in the Callbook because ARI provides the Italian list to the
Callbook and it provides only the list of its members, and I0JBK is not a
member.
Very 73,
Fred Laun, K3ZO
>From Roland A. Anders ("Rol")" <AB88%CATCC.BITNET@VTBIT.CC.VT.EDU Sun Aug 27
>06:06:31 1995
From: Roland A. Anders ("Rol")" <AB88%CATCC.BITNET@VTBIT.CC.VT.EDU (Roland A.
Anders ( Rol ))
Subject: High beams at W3LPL
Message-ID: <27AUG95.01197568.0054.MUSIC@CATCC>
Bill: Frank suggested that I drop you a note regarding his
high 20 meter beam in reply to your posting that a very
high beam is often inferior to a lower ant. In a word, not
so! There are times when the stacks at 50/100 feet are
slightly better than the high beam, but not often. And
no matter where the new multiplier under the pileup, Tyler
and I invariably point the 200 ft beam when we get impatient to break
the pile. Even SA or AF. I do use the stacks once the
band open to EU in the AM. On the long hauls and "non-
standard" paths (especially in the wee hours when the band
is not really open) the high beam is MUCH better (stuff like
working eastern europe with the beam of the south pole, long
path to the Far East and western pacific over the southeast
path, etc.) However, the other side is this: Those who have
never used a 200 foot high 5 element 20 m beam would be
astonished how seldom it is much better than the 50 ft or 100
foot 5 el! My conclusion is that a good monobander at moderate
height in a good location (unobstucted horizon) is not
much down from a really high beam. Tyler and I won 20 meters
a couple of years back with the high beam totally out of commission
due to ice/wind damage--so the lack of the 200' "Rock Crusher" is
not the end of the world! But, in response to your question--
it is rarely inferior to the lower antennas. Note Tyler's
comment about the 200 foot high 10 meter beam--its a killer
even to stateside in the 10 meter contest, and it is 6 or 7 wavelengths
high! Glad to hear more of your thoughts. 73, de Rol K3RA
>From Greg Becker <gb546@bard.edu> Sun Aug 27 12:34:05 1995
From: Greg Becker <gb546@bard.edu> (Greg Becker)
Subject: Remote antenna selection
Message-ID: <Pine.A32.3.91.950827073209.25068A-100000@core.bard.edu>
> I know that Top Ten devices is willing to fabricate something for me, but
> before I go "commercial" lemme see what others have done.
IMHO, if Dave is willing to do it for you, you're wasting your time
looking for another way. Top Ten's products are well-made, and Dave's
after-the-sale support is second-to-none. I recommend Top Ten without
reservation.
73, Greg
Greg Becker NA2N
gb546@bard.edu
>From Roy Hradilek <73374.2465@compuserve.com> Sun Aug 27 15:12:35 1995
From: Roy Hradilek <73374.2465@compuserve.com> (Roy Hradilek)
Subject: NA Quack Party - W5NN
Message-ID: <950827141235_73374.2465_DHS57-1@CompuServe.COM>
Band QSOs Mults
-----------------------
160 18 10
80 74 32
40 208 48
20 375 49
15 12 12
10 70 14
=======================
Total... 757 165
Score: 124,905
I was planning a multi-single for this contest (my first), and in the final
week learned that the only multi category in this contest is multi-2. More
preparation was needed to re-tool the AD5Q QTH for SSB and for a second
station on the high bands (I only have one beam - a KT34-XA at 104 ft).
KB5YVT, the trustee for our club call (W5NN) dropped off a Cushcraft 10-4CD
just before leaving for his dream: a fishing trip in KL7. We rebuilt it in 2
hours, optimizing for gain (instead of front-to-back). It took 3 afternoons
to get it up on a 35 foot push-up pole (mistake). The antenna played very
well, beating the high beam on 10 meter stateside signals by about 3 S-Units.
It was also much quieter. During the contest we made 70 Q's on 10: lots of
KE4's (evil sounding rednecks).
On 20 & 15 we used KC5AMA & KC5HTX, half of our teenage Field Day novice
team. The Heil boomset broke early on, and the mike we used for the rest of
the contest didn't put out very well. This probably cost us about 100 Q's on
20. My new 40 meter wire beam played well. I think all of us need more
experience on lowband SSB. The idea behind this effort was to Elmer some new
contesters, and not operate myself. In the last hours of the contest we
didn't have enough ops, so I ended up doing much of the lowband operating
anyway.
Our other goal was to beat another local multi operation that is known to run
substantially more that 150 watts in this contest (according to their former
operators and an NAQP video showing the glowing tubes). We ran 100 watts on
all bands except 40, where we were able to squeeze 150 watts out of a TS-440.
The competition is rumored to have made about 850 Q's, but we think we beat
them in mults and score.
The "Quack" thing worked out very well, though there were some experienced
contesters scratching their heads. The locals know this really is my nick-
name. It beats the heck out of using phonetics on weak ones.
Ops: KC5AMA & KC5HTX (teenage novices), KG5OW, KK5GJ & AD5Q
73... de Able Ducky Five Quack
>From Keith Morehouse-WB9TIY <blckhole@ripco.com> Sun Aug 27 16:28:26 1995
From: Keith Morehouse-WB9TIY <blckhole@ripco.com> (Keith Morehouse-WB9TIY)
Subject: TIC-RING reduced prices
Message-ID: <Pine.SV4.3.91.950827102424.23592C-100000@golden.ripco.com>
Yep - its true.
John, WB2K, forwarded me a copy of the message he had posted not too long
ago, noting the 1022 ring HAD been reduced to $889 for a "limited time".
Call 1-800-TIC-RING.
Had a guy who offered to sell me a 1 year old 1022 for not too much less
then the sale price of a new unit. Guess HE had not heard of the sale
either.
Thanks for the comments, everyone.
---------------------------###-----------------------------
PROBE ELECTRONICS 100 Higgins Road, Park Ridge IL 60068 USA
Keith J. Morehouse / WB9TIY / Society of Midwest Contesters
708-696-2828 FAX: 708-698-2045 e-mail: blckhole@ripco.com
---------------------------###-----------------------------
>From Rob Shapiro <ND3A@cais.cais.com> Sun Aug 27 23:53:25 1995
From: Rob Shapiro <ND3A@cais.cais.com> (Rob Shapiro)
Subject: CQWW internal memo [eyes only!]
Message-ID: <Chameleon.4.01.2.950827160043.nd3a@nd3a.cais.com>
A contest at W3LPL's (or anywhere) is just not the same without W3ZZ to lift
our
spirits in our time of need!
Rob Shapiro - ND3A
Potomac Valley Radio Club
Internet: nd3a@cais.com
PacketCluster: ND3A > N3RR
---------------Original Message---------------
FROM: Douglas S. Zwiebel KR2Q
TO: John Dorr K1AR
RE: conflict of interest
Hi John...boy we really have 'em fooled, don't we. They really think
that all those N2AA/K2GL wins (4 committee members), the N2RM wins, the
PJ1B, K1AR, K1DG, S50A, P40E (CT1BOH), and K6NA wins (just to name a few)
were 'by skill'. I hope they never look too closely at my still existing
USA QRP record. Boy oh boy John, you were right, they really are stupid.
And I bet that they also think the dozen or so trophies we sponsor actually
get paid for by us too! I wonder if Donovan ever realized that he didn't
start winning until W3ZZ got there?
73's for now (shhhhhh!)
Doug KR2Q@mcimail.com
----------End of Original Message----------
>From km9p@is.net (Bill Fisher) Sun Aug 27 18:05:26 1995
From: km9p@is.net (Bill Fisher) (Bill Fisher)
Subject: Marking home brew boxes
Message-ID: <199508271705.NAA25293@mail1.is.net>
I've been busy building my Upper/Lower/Both switch boxes for controlling the
transco relays I will have up on the tower....
What do you guys use to mark these things and have it look good? I heard
some guys on the local repeater saying there were some clear sheets that you
can feed through a laser printer.
Any ideas? I'll summarize... I don't think anyone has asked this before.
Please email me. NOT THE LIST.
KM9P@IS.NET - Check to make sure you aren't sending a CC to the list before
clicking on that SEND button!
73
|