I receive a email from JE3MAS
-------------------------
JE3MAS writes;(translated from japanese into english)
I have never checked whether "PED" works on *REGULAR*SB or not. But the
hardware looks like quite similar to SBPro, so it must works ok if you set
the I/O address correct...
First of all, you should set the REGULAR-SB I/O address to "220h" and run
"PED" in that configuration. I have no PC/AT compatibles and SB-v1.5 at
present, so I can not check the problem. When I get a PC/AT, I'll check it.
I'm not interested in joining in the network but my friend(JG3KIV) will
transfer any mail to me via packetcluster.
-----------------
Jun, JH4RHF/KH2S or me can transfer any mail to JG3KIV( then Pcluster ->Mas).
Tack JE1CKA/KH0AM
|