Hello Mauri,
did you check
MMANA
http://www.qsl.net/mmhamsoft/mmana/
or
4nec2 Version 5.3.5
http://www.qsl.net/wb6tpu/swindex.html
go on this page down until you find 4nec2 Version 5.3.5
both are freeware, a little bit of trial by error is required for both
to find what you want ;-) but they are for free!
73s de Wolfgang, OE1MWW
i4jmy@iol.it, you wrote:
i4jmy@iol.it> Hi all,
i4jmy@iol.it> I'm in search of an antenna modeling
i4jmy@iol.it> software that runs under a recent windows platform, i.e.
i4jmy@iol.it> XP.
i4jmy@iol.it> What I miss in applications of that kind
i4jmy@iol.it> I know is an automatic antenna optimization feature,
i4jmy@iol.it> where gain, F/B and feed point impedance can be
i4jmy@iol.it> weighted, exactly like it happens with K6STI AO and YO.
i4jmy@iol.it> I find such an iteration quite useful, if
i4jmy@iol.it> not fundamental, expecially with complex antennas and
i4jmy@iol.it> arrays, at least as a starting point.
i4jmy@iol.it> But apparently I couldn't find yet anything like this.
i4jmy@iol.it> Does it exist a NEC or Mininec based
i4jmy@iol.it> application for win98/XP with automatic optimization ?
i4jmy@iol.it> Thanks,
i4jmy@iol.it> Mauri, I4JMY
----
reply to: meister@via.at
Visit our home page at: http://www.via.at/voxcom
VOXCOM GmbH Tel +43 1 728 2626 FAX +43 1 728 3636
_______________________________________________
Antennaware mailing list
Antennaware@contesting.com
http://lists.contesting.com/mailman/listinfo/antennaware
|