Hello Mikael,
Please visit my Array Solutions website for a ton of information in
stacking tri-banders. http://www.arraysolutions.com
The StackMatch uses a wideband high power UN-Un transformer to do the
matching for your beams so only one equal length feedline is needed for
all bands.
Now since you have dissimilar antennas, we need to compensate for the
horizontal offset of the driven elements as well as the phase
differences in the feedpoint matching. KT34 uses dual driven elements
with 4:1 balun the Mosely uses ?
This can all be figured out with a little math and modelling.
Jay, WX0B Array Solutions
Mikael Larsmark SM3WMV // SM3W wrote:
>
> Hello!
>
> I've been planning to build a small contest station. The antennas
> I'm thinking about stacking is a KT34XA and a 6el mosley
> tribander, maybee also my 15m monobander on 15m.
> The questions I have is what spacing I should have between the
> beam, I want to use them on 10,15 and 20m. I understand that I
> gotta use separate stack cables on each band. Any suggestions?
>
> 73 // Mike (SM3WMV // SM3W) #6 WWYC
> Keep up the hamspirit and enjoy ham radio contesting!
>
> --
> FAQ on WWW: http://www.contesting.com/antennaware-faq.html
> Submissions: antennaware@contesting.com
> Administrative requests: antennaware-REQUEST@contesting.com
> Problems: owner-antennaware@contesting.com
--
Jay Terleski
WX0B - Array Solutions
www.arraysolutions.com
--
FAQ on WWW: http://www.contesting.com/antennaware-faq.html
Submissions: antennaware@contesting.com
Administrative requests: antennaware-REQUEST@contesting.com
Problems: owner-antennaware@contesting.com
|