In NEC2, it seems that the presence of a GN card in the input file
will cause NEC not to compute output (RP) for theta > 90.0 regardless
of how the RP card is specified. This is turning out to be very
annoying for my visualization project.
Is this, in fact, a feature and not a bug? I have a .nec file with the
following card in it:
GN 1 0 0 0 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00 0.00E+00
Is there any way I can have NEC compute pattern, with the ground
factored in, and still get a full 360 degree pattern in both theta and
phi? Or at least 360 degrees in one and 180 degrees in the other?
--
----------------------------------------------------------------------------
Kenneth E. Harker "Vox Clamantis in Deserto" kharker@cs.utexas.edu
University of Texas at Austin Amateur Radio Callsign: KM5FA
Department of the Computer Sciences President, UT Amateur Radio Club
Taylor Hall TAY 2.124 Maintainer of the Linux Laptop Home Page
Austin, TX 78712-1188 USA http://www.cs.utexas.edu/users/kharker/
----------------------------------------------------------------------------
--
FAQ on WWW: http://www.contesting.com/antennaware-faq.html
Submissions: antennaware@contesting.com
Administrative requests: antennaware-REQUEST@contesting.com
Problems: owner-antennaware@contesting.com
|