Antennaware
[Top] [All Lists]

[antennaware] Vertically polarized delta loop formula?

To: <antennaware@contesting.com>
Subject: [antennaware] Vertically polarized delta loop formula?
From: k4sb@mindspring.com (K4SB)
Date: Fri, 20 Mar 1998 00:58:04 -0800
> On Thu, 19 Mar 1998 06:33:20 -0800 K4SB <k4sb@mindspring.com> writes:
> >Kenny, try moving the feed to a point 17.5% UP from one of the lower
> >corners. Think you'll
> >be nicely surprised.
> By K4SB
>



> By KM1H
> OR 1/4 wave down from the top if not an equilateral triangle.
>
> Carl  KM1H

No, Carl, this is simply not so. The original idea for this full size loop
was advanced in "Lowband Monitor" some years ago. In modeling, and in
acutality, the triangle need not be
equilateral, but may have the bottom part longer than the others.  The best
feed system for
the thing is still 17.5% up from one of the bottom corners.

Incidentally, the bottom wire should NOT be over about 6-8 feet from ground
on 80, and below 10 on 160.

Best

Ed


--
FAQ on WWW:               http://www.contesting.com/antennaware-faq.html
Submissions:              antennaware@contesting.com
Administrative requests:  antennaware-REQUEST@contesting.com
Problems:                 owner-antennaware@contesting.com

<Prev in Thread] Current Thread [Next in Thread>