I recently acquired A CCA AM-1000D was operational as of 2 years ago when it
was replaced by a solid-state unit. As I already have an RCA BTA1R1 1KW that I
converted to 160m, the CCA is excess to me.
It is a standard plate modulated. 4-400A’s it both the final and the
modulator, the modulator is common to broadcasters, the plate voltage does not
pass through the mod transformer. Modulation is applied from the modulation
transformer to a 4uF cap a 50 H modulation choke. The plate power passes thru
the mod choke.
Picture here https://www.oldradio.com/archives/hardware/CCA-AM1000D.jpg
I have 2 manuals with schematics.
Anyway, it is excess to me. Free for the hauling! Located in Payson Utah.
1400 LBS
If nobody wants it will go to the scrap dealer
Mark
W7HPW
----------------------------------.
/ Don't take life so seriously, __/
/ it's not permanent. /
\_________.---------------------'
_ |/
oo\'
(__)\ _
\ \ .' `.
\ \ / \
\ '" \
\ ( ) \
'-| )--| :. \
| | | | \ '.
c__; c__; '-..'>.__
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
