Here the pair of 150 lb plate xfmr are mounted in the re-purposed Henry
8K-Ultra cabinet.
Each xfmr weighs 150 lbs, and both are identical, with 4300/5300 vac
secondary windings...and 230-240-250 vac primary windings.
Xfmr's are mounted one above the other. Each xfmr is rated at 1.5 amps
CCS. 16 kva CCS for the pair.
Primary's are wired in parallel....and ditto with secondary's. The 5300
vac taps will be used, which will result in aprx 7.5 kv no load for the
B+. 125uf filter cap used (20 x 2500uf lytics in series).
250 amp 'Supercon' connectors used, to route the 240 vac between the xfmr
cabinet and the power supply cabinet which contains the FWB assy and
filter caps etc.
A lot of wiring in the plate xfmr cabinet has been completed since this
latest video was done. He's getting there. It's time consuming.
https://www.youtube.com/watch?v=LUnqiIVUQwg
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|