What you may have missed is that we're talking about industrial-strength
Panasonic high voltage inverters... i.e., switching power supplies used
with microwave ovens. Like in the 1500-watt range. Like in 2200V at
something like 700 mils. Not zactly chicken feed 8-)
Steve, K0XP
On 3/3/2024 6:26 AM, Pete Smith N4ZR wrote:
I must have missed something at the beginning of this thread - 2200
volts is all fine, but I presume the current is very low. So why do
we care (us amps people)?
73, Pete N4ZR
On 3/3/2024 8:49 AM, Steve Thompson via Amps wrote:
Sorry, no idea why a blank email went out. Try again....
There's a piece by VK3HZ on a Panasonic supply from many years ago,
currently to be found at nasaspaceflight.com, also some
discussions in the archives here.
Steve G8GSQ
On 03/03/2024 00:02, Bob D. wrote:
Google brought a couple of youtube videos:
1. Three wire control signal requirements for the Panasonic Inverter
module.
2. A hacked enclosure and control.
Links:
1. https://www.youtube.com/watch?v=Vchhc7SLcaw&t=74s
2. https://www.youtube.com/watch?v=_iX1rkJ53Ck
These things are roughly $60 on ebay, amazon, etc.
Mentioned in the video is 2200V under load. No further detail.
I'm a bit more motivated to dig mine out.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
See my QRZ.com page at *https://www.qrz.com/db/K0XP*
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|