Amps
[Top] [All Lists]

Re: [Amps] AL82 problem PO meter help needed

To: Gerry <gerys1@verizon.net>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] AL82 problem PO meter help needed
From: gudguyham--- via Amps <amps@contesting.com>
Reply-to: "gudguyham@aol.com" <gudguyham@aol.com>
Date: Thu, 29 Dec 2022 18:23:55 +0000 (UTC)
List-post: <mailto:amps@contesting.com>
There’s a calibration pot just under the left hand meter on the meter board 
that adjusts the PO meter.  This is NOT a watt meter it’s an RF volt meter 
that’s all.  You can calibrate it against a wattmeter but it’s frequency 
sensitive.  Consider it a relative meter that’s ball park.

Sent from the all new AOL app for iOS


On Thursday, December 29, 2022, 12:42 PM, Gerry via Amps <amps@contesting.com> 
wrote:

My AL82 meter on PO is reading way high. I have an external meter that shows 
real power and on theAL82 , I can pin the meter with 600 watts out.  Could it 
be a resistor in the meter circuit  or ?

Hoping someone , can suggest a fix.
Tks everyone

Gerry
K1NY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>