Amps
[Top] [All Lists]

Re: [Amps] Actuating a 120 VDC relay with low voltage

To: amps@contesting.com
Subject: Re: [Amps] Actuating a 120 VDC relay with low voltage
From: Alek Petkovic <vk6apk@bigpond.com>
Date: Tue, 27 Dec 2022 09:24:19 +0800
List-post: <mailto:amps@contesting.com>
They come in a 60V and 200V DC version. 9 - 15V DC to switch them


On 27/12/2022 9:23 am, Alek Petkovic wrote:
Yep. They are DC.

On 27/12/2022 9:07 am, Paul Christensen wrote:
"OPTO-22 electronic relay.  You can't get much simpler than that."
If going that route, ensure it's a DC-load solid-state relay -- not the more common AC SSR type that typically depends on a zero-crossing. Last time I
checked, the PT-2500A amp has a -110 VDC amp key line.

Steve, also consider the Keyall device: http://wb9kzy.com/keyallhv.htm
Easy to build, easy to install, and it doesn't care about load polarity: it
works with positive, negative, and AC amp key lines.
  Paul, W9AC

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>