Amps
[Top] [All Lists]

[Amps] Question on Troubleshooting an Alpha 8410 Problem

To: <amps@contesting.com>
Subject: [Amps] Question on Troubleshooting an Alpha 8410 Problem
From: <k9mk@flash.net>
Date: Tue, 29 Nov 2022 14:57:13 -0600
List-post: <mailto:amps@contesting.com>
Greetings to the Group,

    I have been working with a friend with an Alpha 8410.  The amp has been
working well until recently when one evening the main fuses popped.  A
careful check for faults with the tubes out revealed no hard failure.  We
replaced the tubes and main fuses and amp powered right up. It worked fine
for another 3 weeks and then one night a second set of fuses popped.  This
time it occurred while operating.  Again, there was a careful search for a
hard fault, and we found nothing, and no faults were reported either.  We
replaced the fuses again and the amp is working but I expect this to be
recurring until we find the culprit.  For me this one is puzzling.  The
shack wiring is sound, weather was good, and the amp is basically treated
like a Sunday driver.  I have little experience with 4CX1500 tubes and their
failure modes. As the amp uses fast blow fuses, I thought maybe a random
electrically fast transient on the lines (truly a stretch).  Aside from that
does anyone have any thoughts on things to check or watch out for?
Intermittent soft failures like this are very frustrating....  Thanks in
advance....

73, Mike  K9MK



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>