Amps
[Top] [All Lists]

Re: [Amps] DX-100B CW Keying

To: David Gow <6146guy@gmail.com>, Rob Atkinson <ranchorobbo@gmail.com>
Subject: Re: [Amps] DX-100B CW Keying
From: "Randall, Randy" <Randy.Randall@UCHealth.com>
Date: Wed, 5 Jan 2022 18:10:03 +0000
List-post: <mailto:amps@contesting.com>
That explains why so many DX-100's have that mod.  I knew it was a popular mod 
but I never realized it was specifically sold as a mod kit from Heath.  Now I 
know.

Randy.ab9go@gmail.com

-----Original Message-----
From: Amps <amps-bounces@contesting.com> On Behalf Of David Gow
Sent: Monday, January 3, 2022 12:44 PM
To: Rob Atkinson <ranchorobbo@gmail.com>
Cc: amps@contesting.com
Subject: Re: [Amps] DX-100B CW Keying

****WARNING: This email originated outside of UC Health**** DO NOT CLICK links 
or open attachments unless you recognize the sender and know the content is 
safe.

Bothethe DX-100 and the DX-100B came from Heathkit with cathode keying.
Heathkit did release a kit to change to grid block keying and it was available 
(same kit) for both transmitters.  In the instructions Heathkit states "...this 
strictly optional..."  It involves drilling a hole in the front panel to 
install a push button switch and installing a terminal strip on the chassis.  
if there is no push button on the upper right side of the panel then the grid 
block optional modification is not installed.  A copy of the Heathkit 
instructions for the modification  is on Glenn Zook's
(K9STH) web site.The Antique Radios forum is a wonderful resource. This 
modification has not been discussed there yet.
Dave W7VM

On Mon, Jan 3, 2022 at 5:32 AM Rob Atkinson <ranchorobbo@gmail.com> wrote:

> I'd post your question here:
> https://urldefense.com/v3/__https://antiqueradios.com/forums/viewforum
> .php?f=5__;!!Ga0q2A!hY-R8ZAllY56HTe4KzPlsop9nLCk-DikEzkMMCnK7SBV7-K5GX
> 4Zy1AcqqLEI-M6LpLizDuQ29_nEDVS$
>
> The reason is that you need to communicate with vintage radio people.
> I've never owned a DX100 but my experience with classic transmitters
> is that manufacturers made fairly significant changes over production
> runs and the fellows referencing the DX-100 instead of the DX-100B may
> be giving inaccurate information.  For example, EFJ's Ranger began as
> a cathode keyed rig, but the next major revision added a keying bias
> circuit for grid keying.  Next came a PTT modification.  So, it's
> possible the 100B is grid keyed.  You need to use google to find the
> differences between the 100, and 100B.
>
> Happy New Year
>
> Rob
> K5UJ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> https://urldefense.com/v3/__http://lists.contesting.com/mailman/listin
> fo/amps__;!!Ga0q2A!hY-R8ZAllY56HTe4KzPlsop9nLCk-DikEzkMMCnK7SBV7-K5GX4
> Zy1AcqqLEI-M6LpLizDuQ23v1wGXF$
>
_______________________________________________
Amps mailing list
Amps@contesting.com
https://urldefense.com/v3/__http://lists.contesting.com/mailman/listinfo/amps__;!!Ga0q2A!hY-R8ZAllY56HTe4KzPlsop9nLCk-DikEzkMMCnK7SBV7-K5GX4Zy1AcqqLEI-M6LpLizDuQ23v1wGXF$

________________________________

Confidentiality Notice: This e-mail message, including any attachments, is for 
the sole use of the intended recipient(s) and may contain confidential and 
privileged information. Any unauthorized review, use, disclosure or 
distribution is prohibited. If you are not the intended recipient, please 
contact the sender by reply e-mail and destroy all copies of the original 
message.

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>