Amps
[Top] [All Lists]

Re: [Amps] HF 30 dB Coupler

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] HF 30 dB Coupler
From: Ron W4BIN <ka4inm@gmail.com>
Reply-to: ka4inm@gmail.com
Date: Tue, 15 Jun 2021 11:05:34 -0400
List-post: <mailto:amps@contesting.com>
On 6/14/21 8:11 PM, Richard Solomon wrote:

Looking for an HF (3-30 MHz) Coupler
for rf measurements. HB or commercial
will do. Accuracy is not important but
flatness would be a concern.

30dB port would do.

Any suggestions ?

  With this kind of bandwidth, may I suggest it won't be
perfectly flat, so a computer needs to used to normalize
the output by correcting it's actual response.

  I have seen designs for HF directional couplers made
with two (or more) torrid transformers, but directionality
and band width were not reviled.

--
   Ron  W4BIN - Understanding is much better than
                                     knowing how.U
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>