Amps
[Top] [All Lists]

Re: [Amps] SB220 running plate current when no drive; Problem

To: Louis Parascondola <gudguyham@aol.com>
Subject: Re: [Amps] SB220 running plate current when no drive; Problem
From: Rob Atkinson <ranchorobbo@gmail.com>
Date: Thu, 8 Oct 2020 13:31:39 -0500
List-post: <mailto:amps@contesting.com>
On Thu, Oct 8, 2020 at 11:01 AM <gudguyham@aol.com> wrote:
>
> 3-500 tubes with directly heated cathodes, unlike tubes like 8877 and 
> 3cx800’s etc do not have fragile grids nor does reasonable peak grid current 
> have cumulative degrading effects on the grid.  Because the grid is robust a 
> ICAS rating can rise to damn close to 1kw pep output.

You can go ahead and beat on a single 3-500 like that every day and I
guarantee you'll be getting a new one in around 5 years.  Especially
if you operate high duty cycle or with a lot of compression.

73

Rob
K5UJ
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>