[Amps] What limits DC plate supply voltage for GI7B?

["Jim Thomson" <jim.thom@telus.net>]

Date: Fri, 25 Oct 2019 14:09:48 +0100
From: Alan Ibbetson <alan@g3xaq.net>
To: amps@contesting.com
Subject: [Amps] What limits DC plate supply voltage for GI7B?

<Has anyone tried 3KV or more with a GI7B?

<73, Alan G3XAQ

##  Perhaps....if  possible....  hi-pot  test  each  tube  in  question.
Temp  bond the  grid to  the  cathode....  then  hi-pot  between 
anode to  grid. 

##  problem  is,   your  next  batch  down  the  road might  hi-pot  test
lower.    Install a fast  HV  fuse in  series  with a 50  ohm  glitch  
resistor. 

Jim   VE7RF 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps