Carl,
Thanks for the information. What is the grid current reading at 1200w?
JeffTZ4AM
-----Original Message-----
From: Carl <km1h@jeremy.qozzy.com>
To: amps <amps@contesting.com>; Gary Smith <wa6fgi@steeltrails.net>
Sent: Sat, Dec 29, 2018 2:59 pm
Subject: Re: [Amps] Alpha 76A drive levels...
Alpha offered a low drive mod for that series of amps, check their legacy
amp docs.
My 76PA 3 holer will easily run 1800W with100W drive, I back it down for
1200W.
Carl
----- Original Message -----
From: "Gary Smith" <wa6fgi@steeltrails.net>
To: <amps@contesting.com>
Sent: Sunday, December 23, 2018 5:06 PM
Subject: [Amps] Alpha 76A drive levels...
> To the group:
>
> Have a friend who recently purchased a Alpha 76a two-holer.
>
> He currently is driving it about 65 watts getting 500 watts or so output.
>
> As he has no instructions on the amp, is this low level of drive okay or
> should it be driven at a higher level of input power.
>
> Thanks to the group,
>
> Gary...wa6fgi
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|