It was posted by an Alpha87a owner disgruntled over service with one of the
past iterations of Alpha ownership. His site is no longer available. I used
this method (and his memory dump script) to store the memory settings for my
three Alpha 87a's but YMMV.
73 Jerry NY2KW
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of George Fremin III
Sent: Wednesday, October 3, 2018 5:07 AM
To: Dick Green WC1M <wc1m73@gmail.com>
Cc: AMPS <amps@contesting.com>
Subject: Re: [Amps] Alpha 87A problems
> On Oct 1, 2018, at 1:51 PM, Dick Green WC1M <wc1m73@gmail.com> wrote:
>
>
> - The original Alpha company recorded the factory calibration settings
> for all amps made back in the '90s to a PC, then lost them either due
> to a PC glitch, damage to the PC or in confusion following one of the
> many corporate buyouts/reorganizations than have taken place. This
> means you can't just replace a damaged CPU and reload the calibration
> settings. The amp has to be recalibrated by a factory expert Brad is
> the only person I know who can do it. [N.B.: There have been posts on
> this reflector detailing how you can write your CPU settings to a PC,
> and I urge owners to do so ASAP.)
I have looked though the archives for this information and I could not find it.
Can you share the procedure?
—
George
K5TR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|