Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

August 28, 2018

Re: [Amps] Ameritron Al-1500 excessive grid current & shut down, Doug Renwick, 14:08
[Amps] Ameritron Al-1500 excessived grid current & shut down, Jim Thomson, 14:08
Re: [Amps] FW: Ameritron Al-1500 excessived grid current & shut down, gudguyham--- via Amps, 14:08

August 27, 2018

Re: [Amps] Ameritron Al-1500 excessived grid current & shut down, w8hw, 11:30
[Amps] FW: Ameritron Al-1500 excessived grid current & shut down, David Robbins, 11:30
Re: [Amps] When to leave the amp on vs turn off., Martin Sole, 11:30
Re: [Amps] Ameritron Al-1500 excessived grid current & shut down, MU 4CX250B, 11:30
Re: [Amps] When to leave the amp on vs turn off., Bill Turner, 09:06
Re: [Amps] When to leave the amp on vs turn off., Gary Smith, 09:06
Re: [Amps] When to leave the amp on vs turn off., RCM, 09:06
[Amps] Ameritron Al-1500 excessived grid current & shut down, Herbert Schoenbohm, 09:06
Re: [Amps] When to leave the amp on vs turn off., MU 4CX250B, 09:06
Re: [Amps] When to leave the amp on vs turn off., David Robbins, 09:06

August 26, 2018

[Amps] When to leave the amp on vs turn off., Gary Smith, 11:12

August 24, 2018

[Amps] NCL2000, Gary Patterson, 09:19
Re: [Amps] 8877 HF amp cathode wiring, Jim Thomson, 09:19
Re: [Amps] 8877 HF amp cathode wiring, MU 4CX250B, 09:19
[Amps] Fwd: 8877 HF amp cathode wiring, gudguyham--- via Amps, 09:19
Re: [Amps] 8877 HF amp cathode wiring, Paul Christensen, 09:19

August 20, 2018

[Amps] remains FS, RAY FRIESS, 08:41
Re: [Amps] 8877 HF amp cathode wiring, Jim, 08:41
Re: [Amps] 8877 HF amp cathode wiring, MU 4CX250B, 08:41

August 19, 2018

Re: [Amps] 47 Ohm 5 watt, Carl, 18:35
[Amps] 8877 HF amp cathode wiring, Jim Thomson, 18:35

August 15, 2018

Re: [Amps] 47 Ohm 5 watt, Bill Turner, 08:10
Re: [Amps] 47 Ohm 5 watt, Bryan Swadener via Amps, 08:10

August 13, 2018

Re: [Amps] 47 Ohm 5 watt, Carl, 09:30
Re: [Amps] 47 Ohm 5 watt, Carl, 09:30
Re: [Amps] 47 Ohm 5 watt, Richard Solomon, 09:30

August 12, 2018

Re: [Amps] 47 Ohm 5 watt, Bill Turner, 12:09
Re: [Amps] 47 Ohm 5 watt, Joe, 12:09
Re: [Amps] 47 Ohm 5 watt, Joe, 12:09

August 11, 2018

Re: [Amps] 47 Ohm 5 watt, Bryan Swadener via Amps, 12:42
Re: [Amps] 47 Ohm 5 watt, David Gow, 12:42
[Amps] YC-156, Larry, 12:42

August 09, 2018

Re: [Amps] 47 Ohm 5 watt, Manfred Mornhinweg, 08:09
Re: [Amps] Big HV Supply, Jim Thomson, 08:09
Re: [Amps] Big HV Supply, Carl, 08:09

August 07, 2018

Re: [Amps] Big HV Supply, John Keating, 22:54
Re: [Amps] FS 3 each 8877 3cx1500a7 SOLD, Ed Stallman, 22:54
[Amps] Big HV Supply, Jim Thomson, 22:54
[Amps] 47 Ohm 5 watt, Joe, 22:54

August 06, 2018

[Amps] FS 3 each 8877 3cx1500a7, Ed Stallman, 10:00
Re: [Amps] Big HV Supply, Carl, 10:00

August 04, 2018

Re: [Amps] Big HV Supply, John Keating, 17:20
Re: [Amps] Lube for roller inductor, Fuqua, Bill L, 00:14
Re: [Amps] Lube for roller inductor, Rob Atkinson, 00:14

August 03, 2018

Re: [Amps] Lube for roller inductor, Stan Gammons, 10:33
Re: [Amps] Big HV Supply, Jim, 10:33
Re: [Amps] Lube for roller inductor, Carl, 10:32
Re: [Amps] Lube for roller inductor, Stan Gammons, 10:32
Re: [Amps] Lube for roller inductor, Carl, 10:32
Re: [Amps] Lube for roller inductor, Stan Gammons, 10:32
Re: [Amps] Lube for roller inductor, Stan Gammons, 10:32
Re: [Amps] Lube for roller inductor, Carl, 10:32
Re: [Amps] Big HV Supply, Carl, 10:32

August 01, 2018

Re: [Amps] AL-80A - Pi/Pi-L Switch Wafer Failure due to arcing, Bill Coleman, 10:03
Re: [Amps] Command manual for VHF 1200?, Andy GD0TEP, 10:03
Re: [Amps] Lube for roller inductor, Stan Gammons, 10:03
[Amps] Big HV Supply, Herbert Schoenbohm, 10:03