------------ ORIGINAL MESSAGE ------------(may be snipped)
On Thu, 25 Jan 2018 07:15:40 +0800, Alek wrote:
>what is critically important, is to check the
>value of the resistors across each of the filter caps.
REPLY:
If you need to replace the resistors, you should use either metal film
or metal oxide film type resistors. Both are very stable over time.
Also, get a wattage rating at least twice or more of the expected
dissipation. More is better.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|