Best bet would likely be Mouser or Digi-Key. Take a digital micrometer
and measure the dimensions of the switch body. Search for a rocker
switch of similar ratings on the Mouser or Digi-Key website. Then look
at the datasheet for the rocker switch to see if you can find a match or
something close dimensions wise that has the same or greater current
rating. If it's the same switch as the Clipperton L, I think this one
will work
https://www.mouser.com/productdetail/ck-components/cm102j12s205dqa?qs=sGAEpiMZZMtNT9UGfLL4eOd3cDQgL8vMAzXeU%2Fx3f0Q%3D
Good luck.
73
Stan
KM4HQE
On 01/28/2018 03:18 PM, Thomas Rieff wrote:
Looks like my power switch is inconsistent and not making contact all the
time.
Have it out to see what it has for numbers...
27 . R . C . 1
16 Amp.3/4HP.120 VAC
3 Terminals
Any thoughts on where a person might find a replacement?
Tom
K0YR
C/O Thomas Rieff
2059 Sundance Lane
North Mankato, MN 56001
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|