[Amps] Contacts Cleaner

To:	Amps group <amps@contesting.com>
Subject:	[Amps] Contacts Cleaner
From:	Joe <nss@mwt.net>
Date:	Mon, 22 Jan 2018 20:54:44 -0600
List-post:	<mailto:amps@contesting.com>

I have been bringing an old SB-220 up from the grave with a 220 volt variac.

Ever soo slowly. But one think I have noticed is the multi switch isvery flakey,


it will read the hv but only with a lot of wiggling

what does everyone recommend as far as a cleaner and best way to clean it?

Joe WB9SBD
--
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Contacts Cleaner, Joe <= Re: [Amps] Contacts Cleaner, Bill Turner Re: [Amps] Contacts Cleaner, Tom Hellem Re: [Amps] Contacts Cleaner, Tom WA9WSJ via Amps Re: [Amps] Contacts Cleaner, Bert Re: [Amps] Contacts Cleaner, Bryan Swadener via Amps

Previous by Date:	[Amps] Attenuation of signal, Jim Thomson
Next by Date:	Re: [Amps] Contacts Cleaner, Bill Turner
Previous by Thread:	[Amps] Attenuation of signal, john shea
Next by Thread:	Re: [Amps] Contacts Cleaner, Bill Turner
Indexes:	[Date] [Thread] [Top] [All Lists]