Kenwood part number:
F05-1533-05
They are 15 amps. Some say they are slow blow. If you have step start, I would
not recommend slow blow.
Here is a link for European fuse types and their measurements. You will need
to measure them to see what they actually are.
http://www.farnell.com/datasheets/353858.pdf
If I remember right, an American fuse 5AG will fit and work just fine but
measure to be sure.
73
Jim W7RY
-----Original Message-----
From: Dick NY1E
Sent: Tuesday, January 09, 2018 4:01 PM
To: amps@contesting.com
Subject: [Amps] TL922A fuses
I want to get some spare fuses for my TL922A, the ones in it have a small nut
like 8-32 the cap with them, I'm guessing what I got in it are that much
shorter than Kenwood supplied or I'm missing a spring?. They are larger
diameter than the typical glass fuse. anyone have a brand and number for the
right fuse?
de Dick NY1E
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|