All this plate choke discussion has me curious about the Alpha 76 plate
choke arrangement.
The schematic shows two 15 uH chokes in series - the usual large one,
and a very small one, with bypass caps to ground on each side.
I recently replaced the small one - the old, original one still seemed
to function, but was blackened. The replacement was 15 uH, 4 amps, from
Mouser.
Questions: Are both of these chokes really 15 uH, or is the schematic
mislabeled ?
Why are both chokes, needed ?
73,
Steve, N2IC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|