Amps
[Top] [All Lists]

Re: [Amps] Plate Choke Issue

To: amps@contesting.com
Subject: Re: [Amps] Plate Choke Issue
From: Steve Wright <stevewrightnz@gmail.com>
Date: Thu, 4 Jan 2018 07:21:37 +1300
List-post: <mailto:amps@contesting.com>
On 04/01/18 04:28, AJ wrote:
> This time I was able to measure where it blew apart, ~20 uh from end to
> end. I slid the wire off the broken ceramic and slid it onto a new one
> mounted it in the amp to measure. I am referring to RFC-1

Well, 20uH in series with the tubes output capacitance is resonant on
about 6-8 MHz.  That might be worth exploring..

S

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>