Silicone rubber sheet wrapped into a cylinder works fine and requires no
machining. The ends simply overlap. The joint can be made a number of
ways including RTV. There was a RED high temp RTV available at one time
although the regular "Silicone" RTV should work (smells like Acetic
Acid). Alpha and others have used this for years. !/16th" Teflon sheet
should also work fine, but OTOH it is slippery and not as easy to work
with. . The nice thing about using sheet is adding a taper is simple.
Speaking of simple, working with these sheets is simple and requires no
special tools.
At one time I had a bunch of the red, high temp rubber and the red high
temp Silastic RTV
I believe the 1/8th inch Silicon rubber might be available at many
automotive shops.
73, Roger (K8RI)
On 12/28/2017 Thursday 6:39 PM, Stan Gammons wrote:
On 12/28/2017 01:15 AM, Roger (K8RI) wrote:
"I think" the GI-7B would be an easy tube to convert to transverse
cooling to replace the no longer available Eimac tubes in the
MLA-2500s. The coolers are easily replaced by removing a single
screw. A lathe and mill could easily build custom radiators. It'd be
a simple, straight forward conversion. IM products?
73, Roger (K8RI)
I haven't decided on the cooling method. But it will probably be
something along the lines of a plexigass cages with the fan mounted so
the air flows up around the tubes and out the holes in the top of the
cage. I've seen some use a machined piece of teflon for chimneys. A
piece of teflon tubing that size is rather pricey though.
I ask on this list about IM products awhile back and the general
consensus is it's not a problem.
Seems like the MLA-2500 is one of the many amps that others have
converted.
73
Stan
KM4HQE
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|