Re: [Amps] Removing Rocker Switch from Alpha 87A

[donroden@hiwaay.net]

Broadcast transmitters used a similar type spring loaded switch and I  
found an open-end wrench that just fit snuggly enough to squeeze the  
springs.
You could probably bend some 1/4 inch square stock to fit over the  
switch.  You don't need a lot of movement before the front panel will  
keep the springs compressed.
Don W4DNR



> On Thu, Dec 7, 2017 at 4:38 PM, Frank Kirschner <frank.kirschner@gmail.com>
> wrote:
>
> > The problem with my 87A is definitely the STBY-OPER rocker switch.  I have
> > the replacement and am ready to put it in.
> >
> > Any hints on how to remove the old switch with a minimum of effort and
> > cussing?  It has two springs on each end, and they need to be pressed in
> > for it to be removed from the front panel.  Tool, approach, etc.?
> >
> > Thanks.
> >
> > 73,
> > Frank
> > KF6E
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps