The Home Depot usually stocks Unistrut products.
Rob - NH6V
On Fri, Jul 7, 2017 at 1:45 PM Roger Parsons via Amps <amps@contesting.com>
wrote:
> Hi Jim
> I think I have now answered my own question by looking for a web page to
> show you. The channel on the cabinet is basically the same as:
>
> http://www.unistrut.us/index.php?WP=cat_detail&S=S05&P=P7000
>
> although it is part of the welded cabinet in my case. The channel nuts are
> basically the same as:
> http://www.unistrut.us/index.php?WP=cat_detail&S=S05&P=P7006
> So clearly they do exist, but I can't find a stockist.
> 73 Roger
>
>
> From: Jim W7RY <jimw7ry@gmail.com>
> To: Roger Parsons <ve3zi@yahoo.com>; Amps <amps@contesting.com>
> Sent: Friday, 7 July 2017, 19:15
> Subject: Re: [Amps] Spring Channel Nuts
>
> A picture is worth a 1000 words. Can you post something and pass along the
> link?
>
> 73
> Jim W7RY
>
>
> -----Original Message-----
> From: Roger Parsons via Amps
> Sent: Friday, July 07, 2017 6:11 PM
> To: Amps
> Subject: [Amps] Spring Channel Nuts
>
> Please forgive me if this is the wrong forum.
>
> I have been happily building an amplifier and other things into an old 19"
> BC transmitter cabinet. The cabinet is quite old but in good condition.
> Unfortunately, it did not come with the rear door, and I am not very happy
> about having lethal voltages around with no protection. So I thought -
> easy - I will fit panels to the rear which will be useful for connectors
> anyway.
> The cabinet has fixing channels in it which are basically unistrut, and
> there are horizonal ones at top and bottom which take standard (spring)
> channel nuts. So that bit really is easy. There are also vertical channels
> at the back which is where I want to fix my panels and these are much
> smaller. To use those I need channel nuts which are approximately 10.5mm
> across the flats. I know that these (did?) exist as I have the three that
> were used for the original door. But I need more and as far as I can see,
> they make hens with teeth seem pretty common.
> Any suggestions?
> 73 RogerVE3ZI
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|