Re: [Amps] Ten-Tec Titan 10 Meter Input SWR

[donroden@hiwaay.net]

True
Don W4DNR

Quoting Bill Turner <dezrat@outlook.com>:

> ------------ ORIGINAL MESSAGE ------------(may be snipped)
>
> On Sun, 11 Jun 2017 19:42:50 +0300, you wrote:
>
> > So my question is: does the driver care (or even
> > know) the difference between a flat 50 ohm line
> > to an amplifier or one that is running at a 2:1 SWR,
> > but whose length is such that the driver "sees" an
> > impedance of 50+j0 Ohms.
> > I say no.
> >
> > Vic 4X6GP
> REPLY:
>
> I say you're right.  The only difference between the two scenarios
> above is the one with 2:1 SWR has some additional line loss, but as
> you might suspect, the driver does not "see" that.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps