Hi Cathy,
That can be seen several ways. One thing I love about my early '80s
vintage Ten Tec 425s is that, thanks to its simplicity and that it's
built with simple parts, it's easy to work on. Most parts failures can
be found with a Simpson 260.
But also because of the keying logic circuitry, and because of which
components fail when something arcs, and because of the interlocks, you
often have no idea where to start. The Alpha error codes are described
in the manual, and they DO give you clues about what went wrong. I'm new
to Alpha -- I just bought an 87A, and prior to doing so, studied the
manual. Yes, the control circuitry is quite complex, and I wouldn't want
to work on it. But that control circuitry can prevent a lot of damage,
and can make tubes last longer by going into protect mode when grid
current rises. The Titan simply gives me an idiot light, and if I'm not
watching it, as is often the case when I'm contesting with two radios, I
can toast a tube or two!
73, Jim K9YC
On Mon,2/27/2017 6:05 AM, Catherine James wrote:
After a few hours of fiddling with my SB-220, I am now comfortable working on it and
expect I can keep it running as long as I can get parts. Reading about these "99
errors" and need to reset microprocessors on more modern amps leaves me cold. I
have zero interest in trying to do maintenance on something with that level of complexity.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|