Good Point!
The Mineral oil or Transformer oil, I wonder what happens to that in
varying amounts of contamination?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 2/21/2017 9:27 AM, Big Don wrote:
Might run another experiment to see how conductive initially distilled
water becomes after spraying it onto the inside of a cabinet, and on some
circuit boards. Collect the drainage in a pan, which now contains any
impurities picked up along the way, and check the conductivity now......
Don N7EF
On Tue, Feb 21, 2017 at 7:22 AM, Jim Thomson <jim.thom@telus.net> wrote:
Date: Mon, 20 Feb 2017 19:05:27 -0500
From: "Ray, W4BYG" <w4byg@att.net>
To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] SS amps watercooling - was PowerGenius XL
FYI: I'm afraid I have to disagree on the statement below about
distilled water being conductive.
In industrial experiments in the use of distilled water, I found it to
be very non-conductive. If I recall correctly, it has a measured
conductivity of 50 to maybe 100 micro-Siemens per centimeter squared.
That's not much. Pure water becomes conductive only if it becomes
contaminated with salt like contaminates. For a comparison, seawater
typically measures in the thousands of micro-Siemens per centimeter
squared, because of the high salt content.
While working on a clients project to do so, I spent many hours
attempting to inject RF into water of various solutions. It was very
difficult in the lab trying to get RF to propagate thru pure water.
Other more contaminated solutions not so much..
73,
Ray, W4BYG
## re-read the post. Neither roger nor I said distilled water is
conductive.
I got out 2 identical plastic caps, and filled one with new distilled
water,and
the 2nd one with tap water from the kitchen sink. Then stuffed the fluke
87a
probes into each one.... dried off between tests. Distilled water reads
sky high
resistance... vs tap water. Thats good enough for me. Distilled water
is dirt cheap
to buy and would make an excellent coolant for water cooled LDMOS. Dunno
how often it would have to be changed out. Even if it was every 6 months
to a year,
or even far less, who cares. Simple procedure.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|