A design prototype? Not disclosing the true amount of windings of a
production model?
73
Jim W7RY
-----Original Message----- From: Jim Brown
Sent: Thursday, February 16, 2017 12:31 PM
To: amps@contesting.com
Subject: Re: [Amps] What am I missing....balun
You're not missing a thing, Jim! This emperor has no clothes.
73, Jim K9YC
On Thu,2/16/2017 9:58 AM, Jim Thomson wrote:
https://www.arraysolutions.com/index.php?_route_=as-50-1din-20k
What am I missing here ? Appears to be 2 turns through 6 x type 31
cores.
These are standard 2.4 inch OD cores. Coax is just RG-393. The mess
of caps on the balanced end is to tune out the xl of the threaded brass
material used to go through each insulator. Rated for 20 kw cw, and
40 kw ssb,
from 1.8 to 30.0 mhz. 12 x 6 x 4 inch nema box. Box appears to be
aluminum.
I cant fathom how this would have enough Z or RS to be effective on
any band, maybe
10m.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps