Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] Acom 2000A - typical output power?

from [Val] [Permanent Link][Original]
To: "Amps group" <amps@contesting.com>
Subject: Re: [Amps] Acom 2000A - typical output power?
From: "Val" <val@vip.bg>
Date: Sat, 1 Oct 2016 13:09:41 +0300
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Bill,
The ACOM 2000A Manual (Specifications) clearly states: "1500W no mode limit. In continuous carrier modes for transmissions longer than 15 minutes, the optional fan must be mounted."
You should had called the seller or manufacturer after the amplifier did not perform according to the specs. 

73, Val LZ1VB



Only on SSB or CW. On RTTY it will overheat after a few minutes.

Been there, cone that.

73, Bill W6WRT


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Amps] Acom 2000A - typical output power?, Val <=
Previous by Date:  Re: [Amps] Buzzing Transformer Follow-up Questions, Roger (K8RI)
Next by Date:  [Amps] illegal amps, Jim Thomson
Previous by Thread:  Re: [Amps] Buzzing Transformer Follow-up Questions, Roger (K8RI)
Next by Thread:  [Amps] illegal amps, Jim Thomson
Indexes:  [Date] [Thread] [Top] [All Lists]