Also consider a high quality electronic meter like N8LP's LP100A. It's
factory calibrated up to 6M, is auto-ranging, and reads complex V and I
to compute power and VSWR. It reads peak hold, average, and continuous
instantaneous peak for tuning. By the time you buy a Bird and a bunch of
slugs, you could buy an LP100A and have money left over. BTW -- an
LP100A can handle two sensors and switch automatically or manually
between them. I'm using a pair of sensors on the outputs of the two Ten
Tec 425s in my SO2R station.
I own a couple of Birds with a bunch of slugs. They only way they get
used now is at VHF and UHF.
73, Jim K9YC
On Tue,3/8/2016 1:00 PM, RCM wrote:
Why not get on the classified sites and try for a trade. Think it would be
better to have the factory marking.
Let me know if you find an extra 1 kw or 2.5….
On Mar 3, 2016, at 15:32, Paul Baldock <paul@paulbaldock.com> wrote:
I am trying to take a UHF slug and turn it to an HF slug. Does any body have
any documentation on the value of components (R-load, L-sample) for the various
slugs?
Thanks
- Paul
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|