From: Bill Turner <dezrat@outlook.com>
To: Amps group <amps@contesting.com>
Subject: Re: [Amps] Shunt resistors for a bridge made of 6A10 diodes
On Wed, 3 Feb 2016 05:35:57 -0800, Jim wrote:
>## KM1H and a few others will use a single disc ceramic cap, like a 4700 pf
>@ 5/10 /15 kv variety...across each leg
>of a FWB, so any transient will simply go through the cap...vs the diodes.
REPLY:
If you're going to do this, the capacitors should be closely matched
for capacitance lest you introduce even more variation across the
diodes. Capacitors will divide AC just as if they were resistors.
73, Bill W6WRT
## It’s a non issue Bill. We are only talking about a total of 4 x caps, ONE
per leg in a FWB.
You can buy 4700 pf disc ceramic caps, made by Ceramite... ( from mouser or
henry radio)... in
10 kv..and also 15 kv. I also use em as bypass caps at the base of plate
chokes.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|