Amps
[Top] [All Lists]

Re: [Amps] Cleaning amp bandswitch

To: "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Cleaning amp bandswitch
From: Mike Waters <mikewate@gmail.com>
Date: Thu, 12 Nov 2015 10:21:45 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I tried Tarn-X, which contains thiourea, in the early 1990's. Although it
indeed quickly shined the silver, it seemed to leave an invisible residue
that eventually deteriorated the silver. I tried it several times, and no
matter how much I soaked, swabbed, and rinsed it off, the finish didn't
stay bright. Sure, silver tarnishes, but something else was happening.

Perhaps I did something wrong, but I'll never use Tarn-X again to clean
silver-plated contacts.

Google "tarn-x ruined my silver" (without the quotes.) You be the judge.
I'll stick with DeoxIT D5 followed by DeoxIT S-Shield, thank you.

73, Mike
www.w0btu.com

On Wed, Nov 11, 2015 at 11:36 AM, Glen Zook via Amps <amps@contesting.com>
wrote:

> ... TarnX applied with a cotton swab.  This works very well on switch
> contacts.
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>