Amps
[Top] [All Lists]

Re: [Amps] Time for New Power Meter

To: "Roger (K8RI)" <k8ri@rogerhalstead.com>, "amps@contesting.com" <amps@contesting.com>
Subject: Re: [Amps] Time for New Power Meter
From: Glen Zook via Amps <amps@contesting.com>
Reply-to: Glen Zook <gzook@yahoo.com>
Date: Thu, 7 May 2015 19:31:06 +0000 (UTC)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
It does take some time for the file to download all 23-pages.  However, they 
are still blank!  I am going to try direct from the repeater builder site and 
see what happens. Glen, K9STH

Website: http://k9sth.net
      From: Roger (K8RI) <k8ri@rogerhalstead.com>
 To: amps@contesting.com 
 Sent: Thursday, May 7, 2015 1:23 PM
 Subject: Re: [Amps] Time for New Power Meter
   
It works here, but took a while for the pages to load.  It shows the 
relatively flat frequency response across the design rang with the roll 
off outside that range in db with the caveat that the elements may 
respond to harmonica and sub harmonics.


  
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>