answer
From: manfred1950@live.com
To: k4vud@hotmail.com
Subject: RE: [Amps] FL-2100B Parts/help needed
Date: Wed, 15 Apr 2015 20:02:51 +0700
Charly,
the small coil is the plate current meter shunt resistor R3, value not
specified in schematic, but should be approximately 0.5 ohm, 2 watts.
73 de HS0ZEU
From: k4vud@hotmail.com
To: manfred1950@live.com
Subject: FW: [Amps] FL-2100B Parts/help needed
Date: Tue, 14 Apr 2015 21:36:19 +0000
> Date: Tue, 14 Apr 2015 11:29:23 -0700
> From: greg.greene74@gmail.com
> To: amps@contesting.com
> Subject: [Amps] FL-2100B Parts/help needed
>
> I'm looking for the small - 1 inch by 1/4 inch coil that is in parallel
> with a ceramic disc and attaches to the centre most HV Cap board on the
> panel side end. Sorry for the poor description but I haven't been able to
> reconcile the schematic to the physical location of the parts.
> The coil I have is burnt but could possibly be rebuilt its only 12 or 13
> turns but I don't know the size or source of the wire to use.
> capacitor markings are 103P followed by 67.
>
> Thanks all
>
> Greg VE7GPG
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|