To: | <ka4inm@gmail.com>, "amps" <amps@contesting.com> |
---|---|
Subject: | Re: [Amps] Test versus working voltage for oil filled capacitor |
From: | "Carl" <km1h@jeremy.qozzy.com> |
Date: | Tue, 14 Apr 2015 18:06:40 -0400 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Actually they sound totally unsuited for the job at anywhere near the marked
voltage, those are energy storage caps for some industrial pulse type of
operation as seen by their feather weight. My 51 uF 9KV "real cap" is about
135# and the pair of 16uF 4KV used in the 1500W 2M amp are about 20-25 #
each iffn I remember from when I built it over 30 years ago.
At 3000V maximum they should be fine but Id certainly take precautions when mounting them; vertical mounting only also. ----- Original Message ----- From: "KA4INM" <ka4inm@gmail.com> To: "amps" <amps@contesting.com> Sent: Tuesday, April 14, 2015 4:48 PM Subject: Re: [Amps] Test versus working voltage for oil filled capacitor On 04/14/2015 04:14 PM, Alan Ibbetson wrote:I have a pair of jumbo oil filled capacitors. They are each 6 x 6 x 12 inches and weigh about 10 pounds. I wish to use them at 3KV off load and with a 2A ripple current under full load.The only markings I can read are 42uF and "test voltage 7500 volts" (in French). What is the consensus on the likely safe working voltage? Is it likely to be well defined for this type of capacitor, in the sense that all have a standard de-rating factor applied?I would Hi pot it to 7600 Volts and if OK I would use them to 7500 Volts, but their nature and robustness is still unknown they could havebeen built to do any of several jobs not related to PS filtering, -- Ron KA4INM - Youvan's corollary: Every action results in unwanted side effects. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5863 / Virus Database: 4331/9535 - Release Date: 04/14/15 _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Test versus working voltage for oil filled capacitor, KA4INM |
---|---|
Next by Date: | [Amps] LK-500 ZB, Jim Thomson |
Previous by Thread: | Re: [Amps] Test versus working voltage for oil filled capacitor, KA4INM |
Next by Thread: | Re: [Amps] Test versus working voltage for oil filled capacitor, Roger (K8RI) |
Indexes: | [Date] [Thread] [Top] [All Lists] |