Bird uses oil in their dummy loads for cooling.
73
Gary K4FMX
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Steve
> Wright
> Sent: Tuesday, March 17, 2015 1:59 PM
> To: amps@contesting.com
> Subject: Re: [Amps] GS-35b fully-submersed oil cooling
>
> On 18/03/15 05:00, Mike Waters <mikewate@gmail.com>
> amps-request@contesting.com wrote:
>
> Many thanks for your engagement.
>
>
> > mechanical, non-RF side [...] another time.
> Thank you. We'll get to that after we establish it is a viable
> proposition RF-wise.
>
>
> >
> > Basically, I think oil cooling of some sort would work.
>
> Thank you, so do I, but quote sources or include logic please. I have
> my own opinions also which I seek to convert to facts - as much as they
> will stand up to scrutiny.
>
>
> > Low anode temp
> > would not be an issue for this tube,
> Quote sources..
>
>
> >
> > What is "dry" transformer oil?
>
> Transformer Oil with traces of water removed with a desiccant
> refrigerant filter/drier - a mechanical issue. For the purposes of RF
> analysis we may call it "dry", ie no moisture in it, and that the oil
> intrinsically is the dielectric, not some moisture-in-oil mixture that
> would be a risky proposition in your auto engine, let alone in a 4KV RF
> closed container.
>
>
> > What is the dielectric constant of that oil?
>
> I do not know. I will ask the supplier and report back. A quick google
> suggests ball-park relative permittivity of 2.0 to 2.5
>
> This is a good question. A rhetorical question might be, What might the
> effect be of raising the atmosphere around the tube relative
> permittivity, from 1.0 to near 3.0 εr, and how might tube parameters be
> effected?
>
> There is likely a good reason this has not been attempted.
>
> >
> > What do you mean by "close-housing..."?
>
> I mean, to build some welded aluminium box/socket arrangement with O
> ring seals and a lid (maybe polycarbonate) on it etc, and that the walls
> of the box are quite close to the tube at many points - maybe only as
> much 1cm apart. A mechanical issue for sure, but the boxes' effect on
> the tube may be marked, or even dramatic, or even fatal - electrically
> and RF-wise, so the box is relevant, electrically.
>
>
> Many thanks again for the engagement.
>
> Steve
> ZL1BHD
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|