I guess a 813 or 4-125 is cheaper
73
Peter
-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of qrv@kd4e.com
Sent: Montag, 19. Januar 2015 22:28
To: amps@contesting.com
Subject: [Amps] Multi-tube vs Single or Dual-tube amps?
>From time to time a multi-tube amp shows up, such designs were
common with sweep tubes, I think some with 4x150's, and 6146's.
Other than the added sockets and wiring complexity are there
additional down-sides to such a design?
e.g. Eight 6146's should generate 600w 160-10m and are cheap.
Just pondering ...
--
*David*
~KD4E~
Nevils, Georgia USA
Safe & Secure Search Engine: duckduckgo.com
Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|