Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] AL-82 PARASITIC SUPPRESSORS

from [Bill and Liz] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] AL-82 PARASITIC SUPPRESSORS
From: "Bill and Liz" <magoo@isp.ca>
Date: Sat, 13 Dec 2014 17:22:38 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
After some of the posts I have read in the archives I think it prudent to put 
the parasitic suppressors back the way they were.  Ameritron wants an arm, two 
hands and a leg for the board on which these are constructed-anyone happen to 
have values/dimensions for same?  I suppose I could go to Bill Orr’s Handbook 
and look at one of his 3-500 amps for values/dimensions.

Bill VE3NH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] AL-82 PARASITIC SUPPRESSORS, Bill and Liz <=
Previous by Date:  Re: [Amps] AL-82, Vic Rosenthal 4X6GP/K2VCO
Next by Date:  [Amps] Terrain Mapping for EZNEC ( Again ), donroden
Previous by Thread:  [Amps] AL-82, Bill and Liz
Next by Thread:  [Amps] Terrain Mapping for EZNEC ( Again ), donroden
Indexes:  [Date] [Thread] [Top] [All Lists]