Amps
[Top] [All Lists]

Re: [Amps] 572B - News?

To: "Al Kozakiewicz" <akozak@hourglass.com>, <amps@contesting.com>
Subject: Re: [Amps] 572B - News?
From: "Carl" <km1h@jeremy.qozzy.com>
Date: Fri, 7 Nov 2014 15:10:57 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>

The FL-2100's with 572B's did not have sufficient bias for Svetlana and even some Chinese tubes, the fix was easy.

OTOH those amps have a wacky neutralizaion circuit that is far from stable on all bands and can take out the bandswitch. Modifying for the old Heath Chippewa or Gonset GSB-201 circuit took care of that.

The SB-201 is not fully neutralized on 10/12 M with any brand of tube and a similar rework saves a lot of "smoke" issues.

Carl
KM1H



Plus, if I recall, there was a service bulletin on the 2100 (not sure it it applied to the Z variant) regarding the use of the Svetlana tubes. The amp needed a modification (probably to the parasitic suppression?) to use that tube.

Al
AB2ZY
________________________________________
From: Amps <amps-bounces@contesting.com> on behalf of Carl <km1h@jeremy.qozzy.com>
Sent: Friday, November 7, 2014 1:03 PM
To: David Harmon; 'Marcelo Cabral'; amps@contesting.com
Subject: Re: [Amps] 572B - News?

The Svetlana works OK but has a smaller anode and less dissipation. They
havent been made in several years now.

Carl
KM1H


----- Original Message -----
From: "David Harmon" <k6xyz@sbcglobal.net>
To: "'Marcelo Cabral'" <py1kr.marcelo@gmail.com>; <amps@contesting.com>
Sent: Friday, November 07, 2014 12:25 PM
Subject: Re: [Amps] 572B - News?


Marcelo.....
Try to find some 572-B made by Svetlana.......they are much better
quality.
I have had several sets of them and I prefer them over the Chinese mfgd
tubes.


73

David Harmon
K6XYZ
Sperry, OK

-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Marcelo
Cabral
Sent: Friday, November 7, 2014 11:18 AM
To: amps@contesting.com
Subject: Re: [Amps] 572B - News?

Hi, Carl!

Good news at the end!
Sincerely, I will try a MP pair of these new tubes after January, but I
haven't big expectations about their reliability.
But, if them survive at least one year, I must be finished the others
projects and be able for start this mod for GI7B. For today, I'll buy some
GI7B's from UR4LL, must be useful in a near future.
Thanks everyone, hope to meet everybody in CQWW CW soon.

Marcelo - PY1KR

-----Original Message-----
From: Carl [mailto:km1h@jeremy.qozzy.com]
Sent: sexta-feira, 7 de novembro de 2014 14:52
To: Marcelo Cabral; amps@contesting.com
Subject: Re: [Amps] 572B - News?

RF Parts will be taking new 572B orders in Jan 2015, Id rather wait than
hack up a perfectly good amp for an inferior tube.
http://www.rfparts.com/tubes/tubes-572b.html

Carl
KM1H


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5315 / Virus Database: 4189/8529 - Release Date: 11/07/14


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5315 / Virus Database: 4189/8529 - Release Date: 11/07/14


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>