[Amps] SB-200 input.

[Tom Osborne <w7why@frontier.com>]

Hi All

I was reading an article in an older QST about doing a conversion on a 
SB-200.
One of the things they did was take the tuned input out and put in a 4:1 
toroid on the input, as the input impedance of the 572B's is around 200 
ohms.  The article said the SWR was around 1.5:1 with this setup.
Is this a good thing to do?  Sure would save a lot of fiddling around 
tuning the input.  73
Tom W7WHY

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps