Amps
[Top] [All Lists]

Re: [Amps] Buck-Boost Transformer Selection

To: <amps@contesting.com>
Subject: Re: [Amps] Buck-Boost Transformer Selection
From: "Doug Renwick" <ve5ra@sasktel.net>
Date: Thu, 26 Jun 2014 13:57:57 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
My line voltage here for my Quadra is 246 measured with an Agilent.
Doug

"Think of all the ways you can hurt yourself laughing."

-----Original Message-----

W5OV wrote:

>
>Anything approved by UL is subjected to testing at +/- 10% of nominal
line
>voltage (for 240, that calculates to 216v to 264v), and the device
should
>be able to operate over that range.
>

A very good point, Bob. 

It also confirms several years of practical experience here: on a supply
that regularly rises to 250V, the Quadra has no problem whatever. 

A buck-boost transformer is simply not needed. 


73 from Ian GM3SEK


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>